MP-Pistol Forum banner
1 - 1 of 1 Posts

·
Registered
M&p 2.0 10mm the lords caliber
Joined
·
7 Posts
Discussion Starter · #1 ·
I purchased a hollosun 508t when I bought my optics ready mp 2.0 10mm. I tried it out but quickly went back to iron sights just until I got use to the gun which I did after 1.5 months, so I decided to put the green dot back on and I probably used it twice since doing so, well Friday I was at the range and started shooting and all of a sudden I get hit in the head with something so I look down and to my surprise I no longer have a optic mounted to my gun and even worse it seared the screws off flush with the mounting platform pic included. Just curious has this happened to anyone else is it the optic or is 10mm to much for these optics. I will say it came with two different size screw options both with blue thread lock but I used the smaller set of screws because of some reviews I seen about the longer screws getting into the action and causing problems on that end. Also if you have any tips for me to try and get these screws out I would appreciate that
Automotive tire Rim Bicycle part Vehicle Carbon
 
1 - 1 of 1 Posts
Top