MP-Pistol Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
112 Posts
Discussion Starter #1
After doing the trigger job, the gun was very accurate i did not have any problems with shooting low and to the right (left handed) as i did before with the stock trigger. All i did to the trigger was polish the metal parts that contact each other during the trigger pull. I did not remove any material with a file or anything. I would not want the trigger any light than mine is at this point of concealed carry. I would suggest every one do this it will greatly improve your accuracy. Look at the range report section, i will post pictures of my target at 50 ft and 75 ft.



By the way i used a dermal and Flitz to polish the components



Adam
 

·
Registered
Joined
·
89 Posts
trigger job

Hi Adam, Man do I wish I had the skill and knowledge to do the polish job to my M&P9c abd 40 full size. However, the best I can do is a field strip to clean


They're great guns and I love shooting them.

Jim
 

·
Registered
Joined
·
367 Posts
I've been thinking about doing mine. I was having trouble today only because of the hard step in the trigger. It kind of makes me jerk because I have to sqeeze a little harder than I'd like.
 

·
Registered
Joined
·
5,726 Posts
1 - 5 of 5 Posts
Top