MP-Pistol Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello, I'm really stumped on this. I have a brand new Shield 9 that upon the slide cycling is jamming on the protruding striker. This is the first firearm I have not been able to fix on my own. I am in a time crunch as I bought this solely to include on my CCW permit and if I don't do it in the next two weeks or so I cannot add it for two years, so sending it to S&W is out of the question. I have purchased a new striker assembly thinking it could be related to that which did not help. I have purchased a new sear block assembly which also did not improve the situation. I installed the Apex Duty/Carry kit which did not change anything and I then put it entirely back to factory.

There is no obstruction in the striker hole. The loaded chamber indicator is not binding on the cartridge or the striker. I have tried different capacity factory magazines. I have tried it with four or five different makes/models of ammunition. Frustratingly/interestingly enough, it functions fine with snap caps but when staggering snap caps and live rounds while testing at home (so I can pull the trigger to release the striker on the snap cap), when I cycle the slide to the next live rough, it still jams. I feel as though the striker is engaging the sear about an 1/8 inch too late but I don't know how that could be considering swapping both the striker and the sear assembly with the same result.

This is the California model with the manual safety and the magazine disconnect. FYI, the sear block assembly I tried was a free-state model without either of those functions and it still did not help the situation.

Thank you for your help,
Joel

Automotive exterior Material property Bumper Gas Font
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Thank you for the replies, particularly the very detailed explanation. That is how I thought it should function. Much like most other striker fired handguns. I have swapped out striker blocks, striker block return springs, verified the plastic dick under the rear sight, swapped striker assemblies. All with the same results of a protruding striker until it resets by contacting the sear and the end of its cycle. I also had a local and very reputable gunsmith take a quick look at it and he basically said it needs to go to Smith & Wesson probably for a replacement slide. I bought a model that was cerokoted by the distributor so returning it also concerned me because S&W wouldn't be able to replace the slide with one of the same color.

I made it to the gun shop where I purchased it yesterday and verified issues by looking at other Shields in stock. After a couple hours of waiting for the owner and the shop disassembling the Shield and verifying everything I said, I convinced them to swap out the malfunctioning slide with another cerokoted one they had in stock. It now works perfectly. Apparently the slide has some sort of manufacturing defect which was not easy to locate or repair and they are going to return it as defective to their distributor and let them deal with it. I give credit to the gun shop, great customer service. They would have been well within their right to tell me I need to send it in to S&W but they helped me out.

Thank you for your help.
Joel
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #9 ·
The problem was not the assembly of the striker assembly. Both the original and the spare I purchased were assembled correctly. It could however be the striker spring guide that was missing. I did not see it in the slide that I originally had. Looking in the replacement slide, I do see the striker spring guide in there so I am guessing that's what the problem was.

The shop I used was local to Thousand Oaks, Ca. They have been hit or miss with me in the past. This was a huge win but there have also been some substantial losses. I'll share the info if someone is in the local area and wants to visit them but they don't do mail order and charge more than any other shop around for a PPT so I'll leave it at that.

Thank you all for the help. The missing striker spring guide seems to be the culprit. Something that could have easily been left out when the distributor cerokoted it so I don't feel real bad for the slide to be going back to them.

Joel
 
1 - 3 of 3 Posts
Top