[gaspipes]

Except for the barrel, magazine for 9mm?



Same locking block? Same recoil spring? Usually a 40/357 will have a different recoil spring than a 9mm. But looking at Brownell's and Midway for a spare recoil spring assembly there is only one.



My 40 has blue paint on it. I want to get a couple spares, they are only $5. for the entire assembly.



I also ordered a spare striker and and a spare sear block assembly.(one without the mag safety)



What other spare parts do I need to keep on hand?



Also, it looks like you can buy just about every part except for the striker safety(FP safety) mechanism and the extractor, spring and pin. Are those parts available from S&W?

 

[Steelshooter]

I believe that subject has been covered in a previous thread. Do a search for it. Also this thread on the 10-8 forum is very good.

http://www.10-8forums.com/ubbthreads/showf...mp;page=2#56136

 

[gaspipes]

Thanks for the link. I see I was on the right track. Need to add a trigger bar assembly to my list.



I take it recoil springs are not caliber specific. :?:

 

[Steelshooter]

http://www.smith-wesson.com/wcsstore/SmWes...List_Retail.pdf



Check the parts list.