MP-Pistol Forum banner

1 - 18 of 18 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter #1
I was looking throught my brownells catalog and noticed henie slant pro rear sight # 394-000-008 that says it fits novak dove tail will it work on the m&p :?:

and also what style front dove tail sight should i get to match the rear.

in the catalog i noticed 2 defferant dove tail front sight demensions 60x.300x60 ,65x.330x65 any info would be great i would really like to have pro slant straight eight sights on my m&p


Thank you for any response
 

·
Registered
Joined
·
1,507 Posts
Nope, Not the same dovetail cut. Unfortunatly there are at least a half dozen different novak dovetail cuts. None of them will work with the M&P. The M&P Novak cut is an all together new cut this is why there is not any replacement sights on the market YET. There will be some replacements soon, hopefully in the next couple weeks :wink:



Dan
 

·
Registered
Joined
·
104 Posts
FWIW I emailed Heinie about some Straight Eights and the response i got was they were expecting to have them ready first of the year.
 

·
Registered
Joined
·
201 Posts
Good deal. Dan, can you keep us informed on a few different aftermarket sights that come out for the MP?



I would hope that Warren Tactical would also put out a set, kind of like his Sevigny sights for the Glocks.



What do you use for USPSA, (provided you shoot USPSA), or IDPA?



Thanks,
 

·
Site Founder
Joined
·
2,889 Posts
K said:
I would hope that Warren Tactical would also put out a set, kind of like his Sevigny sights for the Glocks.


I'll be stocking the Warren sights as soon as they start shipping, I'm high up on the list.
 

·
Registered
Joined
·
49 Posts
Jester, thanks for staying on top of the aftermarket goodies for the M&P and keeping us posted. Is it just me, or does seem like the aftermarket suppliers seems to be moving slow considering the popularity of the M&P?
 

·
Registered
Joined
·
1,771 Posts
Jester said:
[quote name='K']



I would hope that Warren Tactical would also put out a set, kind of like his Sevigny sights for the Glocks.


I'll be stocking the Warren sights as soon as they start shipping, I'm high up on the list.[/quote]



That's good news, I'll have to keep my eye out because Warren Tacticals are first on my upgrade list.
 

·
Registered
Joined
·
298 Posts
Just to revive this thread a bit....



I sent an email to Heinie about sights for the M&P, and about a week ago they replied stating that they expect them to be available in 4-6 weeks.
 

·
Registered
Joined
·
1 Posts
have any of the custom gunsmiths picked up the straight 8s? I pick up a M&P 9 this week and will be replacing the factory sights
 

·
Registered
Joined
·
298 Posts
SLOWRID3 said:
have any of the custom gunsmiths picked up the straight 8s? I pick up a M&P 9 this week and will be replacing the factory sights


I dont believe that Heinie has made them available yet....
 

·
Registered
Joined
·
4,396 Posts
I think Warren 2-dot night sights will be available before the end of the year. I spoke with Scott at the IDPA Nationals and bugged him incessantly for a set.




All three semiauto division champs (CDP, ESP, SSP) were using Warren sights, as well as two out of the three 1st Master and 2nd Master winners. Warren sights were also used by the High Industry, High Lady, High Law Enforcement, High Military, High Military Veteran, and High Senior winners (9 shooters, 13 trophies).
 

·
Registered
Joined
·
1,507 Posts
I have a few of my rear sights a single tritium vial.
 

·
Registered
Joined
·
1,221 Posts
I'm wondering what front sight height the Heinie rear will require?
 

·
Registered
Joined
·
164 Posts
I like the Heine dot above dot (figure 8) sights but like even more the simple post rear, dot front (i sight.) I'm looking for something simpler with the fastest acquisition. I'll probably either go with an XS or Suresight. XS is available now. Suresight is supposed to be available in June.
 
1 - 18 of 18 Posts
Top