MP-Pistol Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
708 Posts
Discussion Starter #1

·
Registered
Joined
·
1,522 Posts
The lube and protectant sounds like mil standard CLP. Which you can use all over your gun. THe bore cleaner is just a cleaner and will strip out lubrication. No idea on how it works with polymers, but it should be safe to use on all the metal bits. Just remember to use the first one on the bits that need lube afterwards.



There are only two really important rules.



1) make sure the gun is unloaded.

2) make sure the gun is unloaded.



Less importantly, be careful of the crown of the barrel, and don't use steel bore brushes.
 

·
Registered
Joined
·
464 Posts
You can use non-cloronated brake cleaner to get the crap out. Its really fast and easy. I still use Hoppes for the bore. Coat it in CLP and your ready to go. :wink:
 
1 - 4 of 4 Posts
Top