MP-Pistol Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
20 Posts
Curious as to why?

Not criticizing, just curious. What is to be gained putting a 2.0 slide on a 1st generation frame?

Thanks.

CenTx
 

·
Registered
Joined
·
20 Posts
No idea I'm just trying to put a longer slide on my compact.
If you put a 4" or longer barrel on a 9c there will be a 1/2' or so gap between the frame and the slide. see attached pic.

Another issue with the 2.0 on a 1st gen M&P, the slide stop is different. I have put a 1st gen barrel on a 2.0 and changed out the slide stop and removed the piece that prevents the slide from following on a hard reload.

CenTx
 

Attachments

·
Registered
Joined
·
651 Posts
It says it's not guaranteed to work for 2.0 but the way I found it was through a video showing that it off on a 2.0 so I'm willing to try it.
Ok
I just thought I would ask because the measurements are different between the 1.0 and 2.0 compact guns. I figured that 1/2" might cause a problem.
 
1 - 9 of 9 Posts
Top