MP-Pistol Forum banner
1 - 2 of 2 Posts

· Registered
7 Posts
My new Sear Housing Block Assembly arrived from Brownell's today:-

It was supposed to be the assembly without the IL (Internal Lock) and Ms (Magazine safety). However, although it was "missing" the Internal lock, it still had the Mag safety disconnect installed. :?

The part number that I ordered and the part number on the bag were correct.

Not a big deal as I just removed the mag safety and now have a spare sear block. I suspect that Brownell's is mis-packaging these sear housing blocks.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.