MP-Pistol Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
936 Posts
I assume your problem is trigger creep.

You have to remember that nice 1911 trigger jobs have the benefit of jigs to hold the sear and hammer in perfect position so that the engagement surfaces are square and angles are precise.



You cant get that feel on an M&P sear and striker freehand with a file and some stoning without a lot of practice, good eyes, and a good amount of labor.



Ive spent the last three days working on the sear/striker surfaces and Im still not satisfied.

-getting there, but still not satisfied.



Ill bet Dan & Co. burned through a sear or two when they started working on M&P's. 8)
 

·
Registered
Joined
·
936 Posts
gotta ask; what difference to you feel when pulling a 80 series trigger?



I cant imagine someone could actually feel the 80series parts if properly prepped as part of a trigger job.
 
1 - 2 of 2 Posts
Top