[mike cyrwus]

I bought a lightning strike GR for a G17 from Brownells that I understand to be swappable for the stock M&P one. It came with a round spring guide rod, presumable sprung for a G17. I also bought a bunch of ISMI flat guide rods for Glocks, to play around with springing the M&P, and the darn flat spring doesnt fit the rod, its too tight.

There are a lot of glock guys on here, so is this normal? Do ISMI flat springs not fit some aftermarket rods?

Which ones specifically will work in the M&P with ISMI springs? Thansk for the help.

 

[coltman1985]

Check out Wolff springs or Don's guide rods. JAS!

 

[YukonGlocker]

I'm getting ready to buy a tungsten non-captured rod from SSS.

I will buy some springs from them also.

http://speedshooterspecialties.com/catalog...ries=Guide+Rods



Sorry, I really don't know the answer to your question.

 

[rjhauser]

the ONLY part I know of that works is from TopGlock.Com



42279 Captive guide rod for models 17-22-24-31-34-35 $20.96



42282 Non Captive guide rod for models 17-22-24-31-34-35 $16.88



The flat wire springs require something special about the Rod.



Personally, I go with Wolff.



:?

 

[mike cyrwus]

I'm getting ready to buy a tungsten non-captured rod from SSS.

I will buy some springs from them also.

http://speedshooterspecialties.com/catalog...ries=Guide+Rods



Sorry, I really don't know the answer to your question.

If you want to add a ss guide rod to that order, Ill split the shipping with ya!

 

[YukonGlocker]

If you want to add a ss guide rod to that order, Ill split the shipping with ya!

Done. It should be here next week.