MP-Pistol Forum banner

Novak Rear Sight

2241 Views 4 Replies 3 Participants Last post by  Dan Burwell
I bought my M&P 9 about two months ago and it has preformed flawlessly. My groups have all been a little left of Point of Aim, so I decided to move the rear sight just a bit to compensate. I removed the locking screw on the rear sight and started tapping the sight with a brass punch and hammer. Tapping didn't work and soon I was almost pounding the sight with the won't budge. So my question to all you M&P experts is how do I get the rear sight to "Drift" without destroying it or the slide??
1 - 1 of 5 Posts
Call me a pessimist, but I used a vise and a brass punch, and mine STILL didn't want to move. It's in there TIGHT.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.