MP-Pistol Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
521 Posts
Brownells lists 3 different parts for the sear assembly http://www.brownells.com/aspx/NS/schematic...mp;model=M%26P+



They are most likely all the same with just a different collection of parts (or without certain parts) for the different features.



I ended up just taking the entire sear disconnect grouping out including the mag safety instead of putting the little spring in. Just have to pull the slide back slightly to put a little tension on the striker, then pull the trigger for takedown.
 
1 - 1 of 1 Posts
Top