[Terminator]

I was wondering which sight tool works with the M&P pistols?

 

[Gregchico]

I use this

http://www.midwayusa.com/eproductpage.exe/...leitemid=163458



I've used this on several H&Ks, Sigs, XDs and now my M&P.



It takes a few minutes to get set up, to get the correct alignment, but it will work every time on many different guns with dovetail sights.

 

[rjhauser]

i got this at the advice of the members of this forum, and found it to work quite well.



just take the time to get it lined up.



8)

 

[gotm4]

I pull the striker and slide cover plate off of the M&P slide and use a MGW Glock sight tool backwards (180degrees opposite of using it on a Glock) and it works very well.

 

[Terminator]

Thanks for the answers guys.



Rob, I was hoping the Glock tool would work. Thanks bro!

 

[TAZ]

I pull the striker and slide cover plate off of the M&P slide and use a MGW Glock sight tool backwards (180degrees opposite of using it on a Glock) and it works very well.

OK I am not afraid to admit it... but you have me visually challenged. Dont spose you have any pics of this procedure. Does it work both front and rear sights?

 

[lugnut]

I've also successfully used the MGW tool on the rear sight. Haven't even tried the front sight though.

 

[gotm4]

I use a vise and a brass punch and hammer to install front sights.