MP-Pistol Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
27 Posts
Took my new shield plus to the range last weekend.
I noticed that it does not allow the slide catch to drop when I slingshot from slide lock.
Please don't recommend thumbing the catch off, as I know there is a problem.
If yours is anything like mine when new, the slide stop can over-extend when manually pushed up. You can see that the catch will slip under the slide if you push up hard enough. In my case, there was a burr on the slide catch that prevented it from coming back down under spring power. After wearing in the pistol some, it stopped doing it. So, if you’re having the problem only after manually pushing up the slide stop, then it could be the same thing that happened to me.
 
1 - 1 of 1 Posts
Top