MP-Pistol Forum banner

Smoothening Trigger Pull

1642 Views 4 Replies 3 Participants Last post by  IAShooter
I have looked at the trigger job instructions passed along by Dan Burwell. They are very good. Thanks Dan. At this point I just wanted to smoothen the tigger pull by polishing the various points of contact but I had a few questions before I went at it. What should I be using to polish and what is the proper way to do it? What are the various points that should be polished?
1 - 5 of 5 Posts
Flitz or automotive rubbing compound...I've use both to polish Glock internals with decent results.
So 1000 grit will get you the mirror like finish? That seems easy enough.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.