[FRT007]

I have an M&P .40 and I can't get remove the grip tool thing. I give it a 1/4 turn in either direction to no avail! I have really tugged on it. Any suggestions?

 

[bjw182005]

i have to turn mine1/2 turn to getit out. but it was hard the first few times. i think lots of us have had this problem at first.

 

[finalfusion]

On my MP9 it was a pain when I first got it. Twist and pull at the same time. It will loosen up!

 

[choochboost]

i have to turn mine1/2 turn to getit out. but it was hard the first few times. i think lots of us have had this problem at first.

If you draw a line straight across the grip, the tool comes 3:00-9:00. To remove you must turn it to 12:00-6:00. This is a quarter turn, not a half turn.

 

[FRT007]

Thanks, choochboost. I feel stupid. One good tug and out it came!

 

[bjhill2]

Turn quarter turn put a few drops of oil or penetrating oil in the slot work the tool back and forth and you should be able to work it out.

 

[tigs40cal]

If all else fails use BFH



http://en.wikipedia.org/wiki/Image:Sledgehammers-1.jpg

I'm sorry crown and water made me do it